CBFYZ - POTASSIUM CYANATE, I-97
- MSDS: CBFYZ
- Manufacturer: CHEM SERVICE INC
- Product Name: POTASSIUM CYANATE, I-97
- National Stock Number: 6810-00N067505
Product Identification
Product ID:POTASSIUM CYANATE, I-97
MSDS Date:09/01/1988
FSC:6810
NIIN:00N067505
MSDS Number: CBFYZ
Responsible Party
US
Emergency Phone: 215-692-3026
Info Phone: 215-692-3026
Cage: 84898
Contractor
Telephone: 610-692-3026
Cage: 8Y898
Ingredients
CYANIC ACID, POTASSIUM SALT; (POTASSIUM CYANATE)
CAS: 590-28-3
RTECS: GS6825000
OSHA PEL N/K
ACGIH TLV: N/K
IF SWALLOWED DRINK 1-2 GLASSES OF WATER. CONT POIS
RTECS: 9999999ZZ
IS VOMIT-WATCH CLOSELY TO MAKE SURE AIRWAY DOES NOT
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CONTACT LENSES SHOULD NOT BE WORN IN
LABORATORY. ALL CHEMICAL SHOULD BE CONSIDERED HAZARDOUS-AVOID
DIRECT PHYSICAL CONTACT! CAN CAUSE EYE IRRITATION. CAN CAUSE SKIN
IRRITATION. REPEATED EXPOSURE TO VA PORS AND/OR DUST CAN CAUSE EYE
INJURY. DUST AND/OR VAPORS CAN CAUSE IRRITATION TO RESPIRATORY
TRACT. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:CAN BE HARMFUL IF SWALLOWED. CAN CAUSE
GASTRO-INTESTINAL DISTURBANCES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:AN ANTIDOTE IS SUBSTANCE INTENDED TO COUNTERACT EFT OF A
POISON. IT SHOULD BE ADMIN ONLY BY PHYS/TRAINED EMER PERS. MED
ADVICE CAN BE OBTAINED FROM POIS CTL CTR. EYES:FLUSH CONTINUOUSLY
W/WATER FOR @ LEAST 15 MINS. SKIN:FLUSH W/WATER FOR 15-20 MINS. IF
NO BURNS HAVE OCCURRED-USE SOAP & WATER TO CLEANSE SKIN.
INHAL:REMOVE PATIENT TO FRESH AIR. ADMIN OXYG IF PATIENT IS HAVING
DFCLTY BRTHG. (SUPDAT)
Fire Fighting
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL POWDER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . DO NOT USE WATER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:EVACUATE AREA. WEAR APPROP OSHA-REGULATED
EQUIPMENT. VENTILATE AREA. SWEEP UP AND PLACE IN APPROPRIATE
CONTAINER. HOLD FOR DISPOSAL. WASH CONTAMINATED SURFACES TO REMOVE
ANY RESIDUES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:USE APPROP NIOSH/MSHA APPRVD SFTY
EQUIP. AVOID CONT W/SKIN, EYES & CLTHG. KEEP TIGHTLY CLSD & STORE
IN COOL DRY PLACE. STORE ONLY W/COMPAT CHEMICALS.
Other Precautions:THIS PRODUCT IS FURNISHED FOR LABORATORY USE ONLY!
OUR PRODUCTS MAY NOT BE USED AS DRUGS, COSMETICS, AGRICULTURAL OR
PESTICIDAL PRODUCTS, FOOD ADDITIVES OR AS HOUSEHOLD CHEMICALS.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:THIS CHEMICAL SHOULD BE HANDLED ONLY IN A HOOD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC:IF PATIENT HAS STOPPED BRTHG ADMIN ARTF RESP. IF PATIENT
IS IN CARD ARREST ADMIN CPR. CONTINUE LIFE SUPPORTING MEASURES
UNTIL MED ASSISTANCE HAS ARRIVED. REMOVE & WASH CLTHG. DO NOT WEA R
SHOES/CLTHG UNTIL ABSOLUTELY FREE OF ALL CHEM ODORS. DO NOT ADMIN
LIQ/INDUCE VOMIT TO UNCON/CONVL PERSON. (ING 2)
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:>1292F,>700
Spec Gravity:2.056
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:SOLUBLE
Appearance and Odor:COLORLESS CRYSTALLINE SOLID.
Stability
Stability Indicator/Materials to Avoid:YES
ACID HALIDES & ANHYDRIDES. REACTS W/PHOSPHORUS HALIDES, STRONG ACIDS,
STRONG OXIDIZING AGENTS, THIONYL CHLORIDE.
Stability Condition to Avoid:DO NOT USE MAGNESIUM/ALUMINUM OR THEIR
ALLOYS AS CONTAINERS. CORRODES COPPER AND ITS ALLOYS.
Hazardous Decomposition Products:DECOMPOSITION LIBERATES TOXIC FUMES.
DECOMPOSES UNDER ACIDIC CNDTNS. DECOMP PROD ARE CORR. DECOMPOSED BY
CHLORINE GAS.
Disposal
Waste Disposal Methods:BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN
AFTERBURNER AND SCRUBBER. DISPOSAL MUST BE I/A/W FEDERAL, STATE &
LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.